HANA Injectors Accessories

Housing Rails
Housing Rails covers HANA injectors accessories for mounting Rail Type injectors. We provide aluminium 2, 3, 4 injectors housing rails as well plastic rails. Using Rail Type Injectors with Housing is the easies way of mounting injectors mainly for smaller emgines where distance between cylinders are not so big.
- 2, 3, 4 Cylinder Rails
- 12mm Inlet
- Removable cap for temperature and pressure sensors
Distribution Splitters
Distribution Splitters are mainly used for feeding Single Type injectors with gas. Distribution plastic rails exist as 3 and 4 Cylinders type (you can feed 3 or 4 cylinders with one distribution rail). Depend on number of cylinders you can use as many splitters as you need.
- 3 and 4 Cylinders Splitters – Side Feed
- 12mm Inlet, 6mm Outlets
- Removable cap for temperature and pressure sensors


Hose Connectors
‘Quick fit’ connectors is new very convenient solution which allows to use Rail Type injectors as a Hose Type – by connecting hose directly to injector. Connectors have a different configurations: with 12mm and 6mm inlets terminated or with different size outlets. Such idea let easly connect injectors in different hose configurations. Extremly useful in tight spaces!
- Converts Rail Type injectors to Hose Type
- Different configurations: 6mm and 12mm Inlets and Outlets
- Secure and easy to fit clamp, same as for petrol injectors
Calibrated Nozzles
Calibration Nozzles are brass pieces for setting up precise gas flow. Used mainly for HANA H2001 GOLD Rail and Hose. Nozzles exists in three sizes marked by stripes: one stripe coresspond to 2.4mm diameter of the nozzle, two stripes to 2.1mm, three to 1.9mm. Blank nozzles for drilling are also awailable.
- High quailty brass with precise nozzle diameters
- Three different nozzle diameters and blank nozzles awailable
- Tighten by Allen HEX key
